WINDOW TINTING · LIMASSOL
A properly specified ceramic tint transforms daily driving in Cyprus — cooler cabin, blocked UV, protected interior and a factory-clean look. We install non-metallic ceramic films that reject up to 90% of infrared heat without interfering with GPS, radio or key-fob signals.
WHY IT MATTERS
Ceramic films reject up to 90% of infrared heat — the cabin cools faster and stays cooler.
Protects your skin and stops dashboards, leather and trims from fading and cracking.
Cuts harsh glare from headlights and low sun for safer, less fatiguing driving.
Holds shattered glass together and shields the interior from prying eyes.
Dyed films fade to purple, offer poor heat rejection and don't age well in Cyprus sun. Metallic films perform better on heat but interfere with GPS, DAB radio, key fobs and tyre-pressure sensors. Ceramic films use nano-ceramic particles that block infrared heat and UV without any metal, so signals pass through untouched and colour stays true for the life of the film. It's the only category we recommend for modern vehicles.
We install a range of shades from very light (70% VLT) to limo-dark (5% VLT). Front side windows in Cyprus must let a legal amount of light through — we'll guide you to the darkest legal option for the front and any shade you like for the rear. Windscreens can be treated with a full-vision heat-rejection film that stays visually clear while blocking most infrared and UV.
1. Interior protection — seats, panels and electronics are covered. 2. Glass prep — every window is deep-cleaned inside and out. 3. Pattern cutting — film is either pre-cut per model or hand-cut on a plotter to fit exactly, with no visible edges inside the door channel. 4. Application — film is slip-solution applied, squeegeed and edge-heated so it sits flush and bubble-free. 5. Cure — the film needs 3–7 days to fully cure. During that time small water pockets can appear; they always disappear.
Don't roll down the windows for the first 3–5 days while the adhesive cures. When cleaning, use a soft microfibre and ammonia-free glass cleaner — ammonia degrades the film. Premium ceramic films come with a lifetime warranty against bubbling, peeling, cracking and colour change, transferable while the film is on the original vehicle.
FAQ
A typical sedan or SUV takes 3–5 hours. Complex glass (curved rear screens, coupes) may take longer.
Not with a quality ceramic film professionally installed. Bubbling and purple discolouration are symptoms of cheap dyed films and poor installation.
A well-chosen shade won't. Very dark rear tints (5–15%) reduce night rear-view — we'll help you balance look and visibility.
Yes — factory-glass replacements, matching an existing tint, or a windscreen-only heat-rejection film are all common requests.
Tell us about your car and the finish you want — we'll send a tailored quote within a few hours.
